Shop
-
Micro:Bit v2 Single
$34.88The Micro:Bit V2 Single is a version of the popular Micro:Bit educational single-board computer, designed for individual or hobbyist use. The Micro:Bit V2 Single is an updated version of the original Micro:Bit, featuring improved hardware and software capabilities, making it easier and more powerful for users to create their own projects. The Micro:Bit V2 Single features a number of inputs and outputs, including a 5×5 LED matrix, two programmable buttons, and a number of sensors and connectors, making it possible to create a wide range of projects, from simple LED displays to more complex projects such as robots and games.
-
Motor Driver TB6612FNG
$13.08The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.
Logic supply voltage (VCC) can be in the range of 2.7–5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).
This little board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1″ pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.
-
Nano I/O Expansion Sensor Shield Module (for Arduino UNO R3/ Nano V3.0)
$1.64The Nano I/O Expansion Sensor Shield Module acts as a breakout board for the Arduino Nano microcontroller. There are several different options for power input and the footprint of this board is the same as the Arduino Duemilanove. In addition, each pinout includes 5V and GND pins for easy connection to sensors or servos. The unit comes fully assembled.
Arduino Nano IO Expansion Shield is specifically designed to facilitate an easy connection between Arduino Nano and many other devices. In essence, it expands the Arduino Nano controller to link those devices in a simple and trouble-free manner. -
Ned Niryo
$4,370.90We are the official distributor of Niryo Ned in Singapore
Niryo Ned is a new generation of 6-axis collaborative robot based on open-source technologies designed for Education, Professional Training and Research.
With the Niryo One, many schools have been able to offer their students to learn Robotics and industry 4.0 directly with a 6-axis robot, open-source and similar in design to industrial robots. The Niryo One is also used in many Research & Development laboratories to test new uses of collaborative robotics.
Meet now its successor, Ned, which has many improvements.
-
Ned Niryo Vision Set
$1,149.95The Niryo NED Vision Set is a comprehensive vision system for robotic applications. It is designed for use with the Niryo One, a 6-axis robotic arm for education and research, but can also be used with other robotic platforms. The set includes a high-definition color camera and a mount for attaching it to the robotic arm. The camera provides real-time video feed and allows for advanced computer vision algorithms, such as object recognition and tracking, to be used in robotic applications. The set also includes software that makes it easy to integrate the camera into your robotic project.
-
Ned2 Electromagnet
$272.50An electromagnet, also known as Ned2, is a type of magnet that uses electricity to produce a magnetic field. Electromagnets are made by winding a wire around a core, such as a piece of iron, and running an electrical current through the wire. This creates a magnetic field around the core, which can be turned on and off by controlling the flow of electricity. Electromagnets are used in a variety of applications, including electric motors, generators, and relays, as well as in scientific and medical equipment. They offer several advantages over permanent magnets, including the ability to produce a much stronger magnetic field and the ability to control the magnetic field with a simple switch. The “Ned2” designation likely refers to a specific brand or model of electromagnet.
-
Ned2 Vision Set
$1,635.00The Vision Set – Ned2 is a high-performance vision system designed for use with robotics and other automated applications. It is designed to work with the Niryo One, a 6-axis robotic arm, but can also be used with other robotic platforms. The set includes a high-definition camera, a mount for attaching it to the robotic arm, and software that makes it easy to integrate the camera into your project. The camera provides real-time video feed and allows for advanced computer vision algorithms, such as object recognition and tracking, to be used in robotic applications.
-
Ned2: Robotic Arm for Education
$7,848.00Ned2 is a robotic arm designed specifically for education and learning. The arm is designed to be easy to use, allowing students to learn about robotics, mechanics, and control systems through hands-on experimentation and projects. The arm features multiple joints and a gripper, allowing it to perform a variety of tasks. It is compatible with a range of programming languages and software platforms, making it accessible to students of different skill levels and backgrounds. The robotic arm is designed to be sturdy and durable, making it suitable for use in educational settings.
-
Niryo Conveyor Belt (Education Set)
$1,744.00This conveyor is designed to be used with or without the Niryo One: you have the ability to control it with the Niryo One and/or with our controller module that makes it autonomous.
Prototype an industrial production line with this autonomous conveyor. Easily reproduce a production line.
-
NiryoOne (Display Set)
Original price was: $3,139.20.$1,255.68Current price is: $1,255.68.The Niryo One (Display Set) is a comprehensive kit designed for educational purposes, DIY enthusiasts, and hobbyists. The kit includes all the necessary components for assembling and operating a 6-axis robotic arm, including a Niryo One robot arm, a display set, a power supply, and a micro-USB cable. The Niryo One robot arm is a versatile and open-source robot that can be used for a wide range of applications, including automation, material handling, and research. The display set, which includes an OLED screen and control buttons, allows users to control the robot arm and monitor its status. The kit is designed to be easy to assemble and use, making it an excellent choice for anyone interested in learning about robotics and automation.
-
NiryoOne Adaptive Gripper
Original price was: $174.40.$107.91Current price is: $107.91.The Niryo One Adaptive Gripper is an open-source robotic arm accessory designed for use with the Niryo One robotic arm. It can be easily attached to the robotic arm, allowing it to pick and manipulate objects. This gripper has six degrees of freedom and is capable of adapting to various object shapes and sizes, making it a versatile tool for various applications. It is compatible with both Arduino and Raspberry Pi, making it ideal for hobby projects and educational purposes.
-
NiryoOne Electromagnet
Original price was: $174.40.$107.91Current price is: $107.91.The Niryo One Electromagnet is a type of electromagnet that is used in industrial and educational applications. It is a part of the Niryo One robotic arm, which is designed to be an accessible and user-friendly platform for learning and experimentation in the fields of robotics and automation. The electromagnet is used in the Niryo One system to grip and manipulate objects, allowing the arm to perform a wide range of tasks and applications. The electromagnet features high magnetic strength and precision control, making it a versatile tool for various industrial and educational applications. Furthermore, the Niryo One system is open-source and modular, allowing users to easily customize and expand the capabilities of the robotic arm. In this way, the Niryo One Electromagnet represents a unique and innovative solution for those looking to explore and experiment with robotics and automation.
-
NiryoOne Large Gripper
Original price was: $174.40.$107.91Current price is: $107.91.The Niryo One Large Gripper is a robotic arm accessory designed to increase the versatility of the Niryo One robot. It has a large gripping capacity and can be used to pick up a wide range of objects. The gripper is easy to install and can be quickly connected to the Niryo One robot. This product is ideal for industrial and educational applications.
-
NiryoOne Vision Set
Original price was: $1,046.40.$872.00Current price is: $872.00.The Niryo One Vision Set is an accessory for the Niryo One robotic arm that provides the ability to perform computer vision tasks. The set includes a camera and a software library that enables the arm to perform tasks such as object recognition, object tracking, and image analysis. With the addition of the Vision Set, the Niryo One robotic arm can be used in a wider range of applications, including industrial inspection and quality control, as well as educational and research projects in the field of computer vision.
The Vision Set is designed to be easy to use and fully integrated with the Niryo One software, allowing users to control both the robotic arm and the vision system from a single interface. The software library included with the set provides a user-friendly API, allowing developers to quickly and easily implement computer vision functionality in their projects. Furthermore, the Niryo One system is open-source, which means that users can customize and expand the capabilities of the system to fit their specific needs. In this way, the Niryo One Vision Set represents a powerful and accessible solution for those looking to incorporate computer vision into their projects.
-
NodeMCU Internet of Thing (IoT) Hobby Kit
$43.60NodeMCU is a popular and powerful open source IoT platform. It includes firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module. The term “NodeMCU” by default refers to the firmware rather than the development kits. The firmware uses the Lua scripting language. .
-
NodeMCU Internet of Thing (IoT) Hobby Kit Set 2
$49.05NodeMCU is a popular and powerful open source IoT platform. It includes firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module. The term “NodeMCU” by default refers to the firmware rather than the development kits. The firmware uses the Lua scripting language. .
-
NPN Bipolar Transistor – 2N2222
$1.09The 2N2222 is a type of NPN bipolar transistor, a type of semiconductor device used as an amplifier or switch in electronic circuits. The 2N2222 has three pins: the collector, the base, and the emitter. When a voltage is applied to the base, it controls the flow of current between the collector and emitter. This allows the 2N2222 to act as a switch or amplifier in a circuit. The 2N2222 is a popular choice for electronic projects due to its low cost, ease of use, and versatility.
-
NVIDIA® Jetson Nano™ Developer Kit-B01
$185.30Join the Revolution and Bring the Power of AI to Millions of Devices.
The NVIDIA® Jetson Nano™ Developer Kit delivers the compute performance to run modern AI workloads at an unprecedented size, power, and cost. Developers, learners, and makers can now run AI frameworks and models for applications like image classification, object detection, segmentation, and speech processing.
-
Obstacle Avoidance Robot Car Kit
$49.05Everyone loves mobile robot 🙂 This is a mobile robot kit based on Maker UNO(Arduino UNO compatible). You can learn electronics, sensors, microcontroller and coding all at once, not to forget having fun too!
-
Official Arduino Motor Shield R3
Original price was: $49.05.$32.70Current price is: $32.70.The Arduino Motor Shield allows your Arduino to drive DC and stepper motors, relays, and solenoids.
-
Official Arduino UNO R3 Board with Free USB Cable
Original price was: $49.05.$38.15Current price is: $38.15.The Arduino UNO R3 Board is a popular open-source microcontroller board based on the ATmega328P. It comes with a free USB cable and features 14 digital input/output pins, 6 analog inputs, a 16 MHz quartz crystal, and a micro-USB connection for programming. This board is suitable for beginners and advanced users who want to control a wide range of devices with their own software.
-
OLED Display Module 128×64 Pixels
$3.82OLED (Organic Light-Emitting Diode) display is 0.96″ and has a resolution of 128 x 64 pixels. It uses a I2C protocol for communication. OLED is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. In low ambient light conditions such as a dark room, an OLED screen can achieve a higher contrast ratio than a LCD. OLED display module also has a much faster response time than an LCD. OLED possesses high application potential for virtually all types of displays.
-
One Channel Relay
$5.45The One Channel relay module is suitable for SCM development, home appliance control. It is with 5V~12V TIL control signal which can control DC / AC signal. The module is perfect for common Arduino application. Useful to control a motor, a led strip, or any other module using Arduino. How to use it: Just connect a digital output of your Arduino to your relay module, and you can control a power-demanding appliance with the digital signal provided by your Arduino.
-
OpenCR Board
$370.60OpenCR1.0 (Open-source Control module for ROS) is an open source robot controller embedded with a powerful MCU from the ARM Cortex-M7 line-up.
The hardware, software, schematics, PCB Gerber, BOM, and firmware source codes of the OpenCR1.0, the main controller used in the official ROS education platform TurtleBot3, are accessible and open to the public.
Supports RS-485 and TTL to control the Dynamixels, and offers UART, CAN and a variety of other communication environment, development tools such as Arduino IDE are available as well.
It has the advantage of being able to operate more powerfully when used with a host controller such as SBC (Single Board Computer).
It provides various exclusive sources based on ROS, so that you can maximize the functions of OpenCR1.0 when using ROS.
-
OpenManipulator-X
$2,616.00The OpenManipulator has full hardware compatibility with TurtleBot3, and allows users to control it more easily by linking with the MoveIT! package. Even if you do not have a real robot, you can control the robot in the Gazebo simulator.
OpenManipulator is composed by Dynamixel X series and 3D printing parts. Dynamixel has a modular form and adopts daisy chain method. This allows users to easily change and add joints for some torque and degree of freedom they need
-
PCL 3D Pen
$51.01A PCL 3D Pen is a tool used to create three-dimensional structures by extruding a melted material, typically PCL (polycaprolactone), which quickly cools and solidifies into a solid structure. PCL is a thermoplastic material that is known for its high melting and solidifying temperatures, making it a popular choice for 3D printing.
The PCL 3D pen operates by heating the PCL material and extruding it through a heated nozzle. As the material is extruded, the user can manipulate it to create the desired shape. The solidified material can then be used to build up structures layer by layer.
-
Pearl Silky Smooth 3D Filament (1.75mm)
$34.88Pearl Silky Smooth 3D Filament (1.75mm) is a specialized 3D printing material that creates prints with a beautiful, pearlescent sheen. The filament is made from high-quality, eco-friendly materials, and has a 1.75mm diameter that allows for precise and consistent extrusion. The result is smooth and detailed prints with a unique and eye-catching appearance. This filament is compatible with most FDM 3D printers and requires no additional modifications to your machine. Whether you’re creating jewelry, decor, or functional objects, Pearl Silky Smooth 3D Filament is a fun and creative way to bring your ideas to life. If you’re looking for a way to add a touch of elegance and originality to your 3D prints, this filament is a great choice.
-
PETG 3D Filament (1.75mm)
$34.88PETG 3D Filament (1.75mm) is a versatile and high-performance 3D printing material that is known for its transparency, durability, and resistance to impact and heat. The filament is made from high-quality, eco-friendly materials and has a 1.75mm diameter that allows for precise and consistent extrusion. This filament is compatible with most FDM 3D printers and requires no additional modifications to your machine. PETG 3D Filament is a great choice for artists, designers, and makers who want to create functional and durable parts for their projects, such as water bottles, containers, or cases
-
Photoresistor Light Sensor Module for Arduino
$3.27A photoresistor light sensor module for Arduino is a component that allows for the measurement of ambient light levels using a photoresistor. Photoresistors, also known as light-dependent resistors (LDRs), are electronic components that change resistance based on the amount of light that they receive.
A photoresistor light sensor module for Arduino is designed to be used with the popular open-source electronics platform and typically contains a photoresistor and a few other electronic components that allow it to interface with the Arduino board. The module is connected to the Arduino board through its analog input pins, which allow it to measure the analog voltage produced by the photoresistor.
-
Piezo Buzzer (Small)
$1.09The Piezo Buzzer (Small) is a compact and convenient audio signaling device that is widely used in a variety of electronic applications. It consists of a piezoelectric element that produces a high-pitched, audible tone when supplied with an electrical voltage. The buzzer is small and lightweight, making it ideal for use in portable and compact electronic devices. The buzzer features two wire leads for easy integration into your circuit, and is compatible with a wide range of voltages and frequencies, making it suitable for use in a variety of projects and applications.
-
PIR Motion Sensor
$2.18he PIR Motion Sensor is a device used to detect the presence of people or objects in a room or area. It operates by using a passive infrared sensor to detect changes in the infrared radiation levels in its field of view, indicating the presence of a moving object. The sensor is small and compact, making it suitable for a range of applications, such as home automation, security systems, and robotics. The sensor outputs a digital signal, making it easy to interface with microcontrollers and other electronics.
-
PIR Motion Sensor Module – SR501
$6.54The PIR Motion Sensor Module – SR501 is a device used to detect motion in a room or area. It operates by using a passive infrared sensor to detect changes in the infrared radiation levels in its field of view, indicating the presence of a moving object. The module is small and compact, making it suitable for a range of applications, such as home automation, security systems, and robotics. The module outputs a digital signal, making it easy to interface with microcontrollers and other electronics.
-
PLA 3D Filament (1.75mm)
$31.61PLA has advantages as it is biodegradable, unlike ABS. PLA is manufactured using renewable raw materials such as corn starch. PLA is one of the easiest materials to print, though it does have a tendency to shrink slightly after 3D printing. You don’t require a heated platform when printing in PLA, unlike with ABS. PLA also prints at a lower temperature than ABS, at between 190ºC to 230ºC. PLA is great for Makerbot printer and most FDM 3D printers.
We offer a wide variety of PLA of different colors. Please choose the color below.
-
Potentiometer
$2.18A potentiometer is a manually adjustable variable resistor with 3 terminals. Two of the terminals are connected to the opposite ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The potentiometer essentially functions as a variable resistance divider. The resistive element can be seen as two resistors in series (the total potentiometer resistance), where the wiper position determines the resistance ratio of the first resistor to the second resistor. If a reference voltage is applied across the end terminals, the position of the wiper determines the output voltage of the potentiometer.
-
Pulse Sensor
$38.15The Pulse Sensor Amped is a plug-and-play heart-rate sensor for Arduino. It can be used by students, artists, athletes, makers, and game & mobile developers who want to easily incorporate live heart-rate data into their projects. It essentially combines a simple optical heart rate sensor with amplification and noise cancellation circuitry making it fast and easy to get reliable pulse readings.
-
Push Button Switch [12mmx12mm]
$0.55The 12mmx12mm Push Button Switch is a compact, momentary switch designed for use in a wide range of electronic applications. It features a 12mm x 12mm body and a smooth, easy-to-press button that provides a satisfying tactile response. The switch is designed for easy installation and features two solder lugs for connecting to your circuit. The switch is suitable for a wide range of voltages and currents, making it ideal for use in a variety of electronic projects, including control panels, toys, and consumer electronics. The 12mmx12mm Push Button Switch is a reliable and durable switch that provides a simple and convenient way to add input controls to your electronic projects.
-
-
PVA Dissolvable 3D Filament (1.75mm)
$75.21PVA Dissolvable 3D Filament (1.75mm) is a specialized 3D printing material that is designed to dissolve in water, making it ideal for creating intricate and complex support structures. The filament is made from high-quality, eco-friendly materials, and has a 1.75mm diameter that allows for precise and consistent extrusion. This filament is compatible with most FDM 3D printers and requires no additional modifications to your machine. Once the 3D print is complete, you can simply immerse it in water and the PVA support structure will dissolve, leaving you with a clean and detailed print. PVA Dissolvable 3D Filament is a great choice for artists, designers, and makers who want to simplify the post-processing stage of their 3D printing projects.
-
Raindrops Detection Module – Rain Weather Sensor Module for Arduino
$5.45- A raindrops detection module, also known as a rain weather sensor module, is an electronic component used to detect the presence of rain. The module is designed to interface with microcontroller boards, such as the popular Arduino platform, and typically contains a rain sensor and a few other electronic components that allow it to communicate with the microcontroller.
The rain sensor in the module works by detecting changes in electrical conductivity due to the presence of water droplets on its surface. When water droplets come into contact with the sensor, they change the electrical conductivity of the sensor, which can be detected by the microcontroller board.
- A raindrops detection module, also known as a rain weather sensor module, is an electronic component used to detect the presence of rain. The module is designed to interface with microcontroller boards, such as the popular Arduino platform, and typically contains a rain sensor and a few other electronic components that allow it to communicate with the microcontroller.
-
-
-
Raspberry Pi 4 5V 3A Type-C USB Power Supply
$11.995V 3A Type-C USB Adapter Power Supply Cord For Raspberry Pi 4. Also suitable for mini TV, 2.5 inch mobile hard disk, mobile DVD, TV box, wireless audio and video equipment, charging equipment, MP3/MP4, small table lamp, router, switch, game console, telephone, lantern, camera, surveillance Equipment, controllers, etc. Especially suitable for all kinds of household / portable fiber optic modems and routers.
-
Raspberry Pi 4 5V 3A Type-C USB Power Supply(Clone)
$9.815V 3A Type-C USB Adapter Power Supply Cord For Raspberry Pi 4. Also suitable for mini TV, 2.5 inch mobile hard disk, mobile DVD, TV box, wireless audio and video equipment, charging equipment, MP3/MP4, small table lamp, router, switch, game console, telephone, lantern, camera, surveillance Equipment, controllers, etc. Especially suitable for all kinds of household / portable fiber optic modems and routers.
-
Raspberry Pi 4 Aluminum Heatsink Case
$16.35It is not an enclosure or case, it should be called heatsink because the case itself is CNC aluminum and comes with thermal paste/tape to effectively dissipate heat generated from the processor, RAM IC. Furthermore, it is also integrated with two cooling fans (assembled, but not fasten to the case), just connect the power to run it. Please note that its Just the casing only (Without Raspberry Pi) The heatsink is only for Raspberry Pi 4 usage.
-
Raspberry Pi 4 Model B – 1GB
$65.40Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems.
-
Raspberry Pi 4 Model B – 2GB
$76.30Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems.
-
Raspberry Pi 4 Model B – 4GB
$91.56Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems.
-
Raspberry Pi 4 Model B – 8GB
$128.62Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems.
