IoT

  • Out StockQuick View

    Arduino UNO ESP8266 WiFi Shield

    $10.90

    UNO R3 ESP8266 serial WiFi expansion board shield ESP-12E CC3000

  • Out StockQuick View

    Dragino NB-IoT Shield-B5

    $65.40

    NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services

  • Out StockQuick View

    ESP32 Development Board

    $21.80

    ESP32 Development Board is made with the official WROOM32 module,esp,esp 32,wifi esp

  • ESP32-CAM IoT Kit

    $49.05

    ESP32-CAM is an ESP32 Wireless IoT Vision Development Board in a very small form factor, designed to be used in various IoT projects, such as home smart devices, industrial wireless control, wireless monitoring, QR wireless identification and so on.

    It supports deep sleep mode with power consumption as low as 6mA at 5V which makes it ideal for portable IoT applications. It’s suitable as a low-cost CCTV camera.

    Package Included:

    • 1 x ESP32-CAM Module
    • 1 x Camera Module OV2640 2MP
    • 1 x FT232RL Module
    • 1 x Female to Female Dupont Jumper Wires
    • 1 x 16GB microSD Card
  • Out StockQuick View

    ESP8266 ESP-01 WiFi Module

    $1.64

    The ESP8266 ESP-01 is a Wi-Fi module that allows microcontrollers access to a Wi-Fi network. This module is a self-contained SOC (System On a Chip) that doesn’t necessarily need a microcontroller to manipulate inputs and outputs as you would normally do with an Arduino, for example, because the ESP-01 acts as a small computer. Depending on the version of the ESP8266, it is possible to have up to 9 GPIOs (General Purpose Input Output). Thus, we can give a microcontroller internet access like the Wi-Fi shield does to the Arduino, or we can simply program the ESP8266 to not only have access to a Wi-Fi network, but to act as a microcontroller as well. This makes the ESP8266 very versatile, and it can save you some money and space in your projects.

  • ESP8266 ESP12 Module

    $6.00

    ESP8266 ESP-12 Remote Serial Port WIFI Transceiver Wireless Module is developed by Ai-thinker Team. The module supports standard IEEE802.11 b/g/n, complete TCP/IP protocol stack. Users can use the
    add modules to an existing device networking, or building a separate network controller.

  • ESP8266 NodeMCU v2 WiFi Board

    $21.80

    NodeMcu is an open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines. The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board. Power your developement in the fastest way combining it with NodeMcu Firmware!

  • Out StockQuick View

    ESP8266 NodeMCU v3 WiFi Board

    $20.71

    NodeMCU V3 is an open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines. The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board. Power your developement in the fastest way combining it with NodeMcu Firmware!

  • ESP8266 Serial WiFi Wireless Transceiver Module

    $10.90

    ESP8266 Serial Wifi Wireless Transceiver Module is a low-cost, integrated Wi-Fi transceiver module designed for microcontroller projects. It operates on a single-chip SoC (System on Chip) and can be used to add Wi-Fi connectivity to microcontroller projects. The module can be connected to a microcontroller via serial communication, and it supports both station and soft access point modes, allowing it to connect to Wi-Fi networks or create its own network. The module can be programmed using the Arduino platform and has a small form factor, making it suitable for compact projects and wearable devices.

  • HC-05 Master / Slave Bluetooth Module

    $10.90

    The HC-05 is a class 2 Bluetooth module designed for transparent wireless serial communication. It is pre-configured as a slave Bluetooth device. Once it is paired to a master Bluetooth device such as PC, smart phones and tablet, its operation becomes transparent to the user. No user code

  • LoRa Arduino Shield with Antenna

    $43.60

    LoRa is an acronym for Long Range and it is a wireless technology where a low powered sender transmit small data packages (0.3 kbps to 5.5 kbps) to a receiver over a long distance.. LoRa uses a radio modulation technique (spread spectrum) that can be generated by Semtech LoRa transceiver chips.

    LoRa modulation technique allows long range communication of small amounts of data (which means a low bandwidth), high immunity to interference, while minimising power consumption. So, it allows long distance communication with low power requirements

  • NodeMCU Internet of Thing (IoT) Hobby Kit

    $43.60

    NodeMCU is a popular and powerful open source IoT platform. It includes firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module. The term “NodeMCU” by default refers to the firmware rather than the development kits. The firmware uses the Lua scripting language. .