Arduino Peripherals

  • Analog Keyboard and Mouse Gamepad Joystick Shield for Arduino

    $17.44

    The Analog Keyboard and Mouse Gamepad Joystick Shield for Arduino is a module designed to be used with the Arduino platform. It allows you to connect and use a keyboard, mouse, gamepad, and joystick on your Arduino projects. The shield includes analog inputs for reading the position of joysticks, buttons for gamepad and keyboard inputs, and communication interfaces for connecting a mouse. The module is compatible with the popular USB Human Interface Device (HID) protocol, making it easy to interface with a wide range of input devices.

  • DHT11 Temperature and Humidity Sensor Module

    $8.72

    The DHT11 temperature and humidity sensor module is an electronic device used to measure the temperature and humidity of a surrounding environment. The module uses a combined digital temperature and humidity sensor that measures both parameters using a single device.

    The DHT11 sensor module is designed to interface with microcontroller boards, such as the popular Arduino platform, and typically contains the DHT11 sensor and a few other electronic components that allow it to communicate with the microcontroller.

  • Electronic 10k Slide Potentiometer Model

    $5.45

    A potentiometer module for Arduino is an electronic component that allows for the measurement of analog values by converting the position of a rotating shaft or slider into a electrical signal. Potentiometers are commonly used to control the brightness of a light, the volume of an audio system, or to sense the position of a joystick, among other applications.

    A potentiometer module for Arduino is a convenient and easy-to-use component that is specifically designed to be used with the popular open-source electronics platform. The module typically contains a potentiometer, which is a variable resistor, as well as a few other electronic components that allow it to interface with the Arduino board.

  • Out StockQuick View

    Infrared Remote Control Module for Arduino

    $9.81

    The Infrared Remote Control Module for Arduino is a compact and easy-to-use module that allows you to control your Arduino projects with an infrared remote control. This module features a 38kHz IR receiver and can be easily connected to your Arduino board via a 3-pin interface. The module is compatible with most common IR remote controls and supports both NEC and RC5 protocols. With the Infrared Remote Control Module for Arduino, you can add remote control functionality to your projects without the need for complex coding. This module is perfect for creating home automation systems, controlling lights, or adding other forms of remote control to your projects.

  • Out Stock
    MeArm Robot Arduino Kit - Orange
    Quick View

    MeArm Robot Arduino Kit

    $113.36

    Enter the world of Robotics Engineering with the MeArm robot arm kit for micro:bit. An easy build kit for ages 11 & up, supplied with all parts/tools.

    The MeArm Arduino Compatible Kit version is an easy-to-build robot arm kit that’s designed to get children (and adults!) learning about technology, engineering and programming. It’s been expressly designed to be easy to build (age 11+) and use.

    At its heart is the Arduino Compatible ESP 8266 WiFi board. This board is a low power board designed specifically for IoT applications that has an on-board Arduino IDE and WiFi. This means that you can create code in any Arduino compatible editor, drop it onto the board and get going straight away and with no additional boards required. Build ‘n’ Play!

  • Photoresistor Light Sensor Module for Arduino

    $3.27

    A photoresistor light sensor module for Arduino is a component that allows for the measurement of ambient light levels using a photoresistor. Photoresistors, also known as light-dependent resistors (LDRs), are electronic components that change resistance based on the amount of light that they receive.

    A photoresistor light sensor module for Arduino is designed to be used with the popular open-source electronics platform and typically contains a photoresistor and a few other electronic components that allow it to interface with the Arduino board. The module is connected to the Arduino board through its analog input pins, which allow it to measure the analog voltage produced by the photoresistor.

  • Out StockQuick View

    Raindrops Detection Module – Rain Weather Sensor Module for Arduino

    $5.45
    • A raindrops detection module, also known as a rain weather sensor module, is an electronic component used to detect the presence of rain. The module is designed to interface with microcontroller boards, such as the popular Arduino platform, and typically contains a rain sensor and a few other electronic components that allow it to communicate with the microcontroller.

      The rain sensor in the module works by detecting changes in electrical conductivity due to the presence of water droplets on its surface. When water droplets come into contact with the sensor, they change the electrical conductivity of the sensor, which can be detected by the microcontroller board.

  • Soil Moisture Sensor Module – Hygrometer Humidity Detector for Arduino Watering

    $8.72

    A soil moisture sensor module is an electronic device used to measure the water content in soil. It works by measuring the electrical resistance of the soil, which changes with the amount of water present. The hygrometer humidity detector component of the module detects the relative humidity of the air, which can impact soil moisture levels. The module can be used with an Arduino microcontroller to create a smart watering system for plants. The system can use the data from the soil moisture sensor and hygrometer to determine when to water the plants and how much water to provide, ensuring optimal growing conditions.

  • Tilt Sensor

    $3.27

    A tilt sensor, also known as a tilt switch, is a type of switch that is used to detect the angle of inclination of an object with respect to the ground or gravity. The sensor works by using the principle of gravity to change the position of a ball or liquid inside the switch, which in turn changes the electrical contact and triggers the switch.

    Tilt sensors are typically small, compact devices that can be easily integrated into a variety of applications. They are commonly used in mobile devices, such as smartphones and tablet computers, to detect the orientation of the device and adjust the screen accordingly.

  • TTP223B Capacitive Touch Sensor

    $1.09

    This touch sensor is a capacitive touch sensor module and the sensor driver is based on the driver IC TTP223. This capacitive touch sensor is an ideal alternative for the old-fashioned keypads and buttons. The operating voltage of the TTP223 IC is from the 2V to 5.5V and the power consumption of the touch sensor is very low. Due to the inexpensive, low power consumption, and easy to integrate support, the touch sensor with TTP223 becomes popular in the capacitive touch sensor segment.