Robots

  • Out Stock
    Quick View

    Electromagnet – Ned2

    $270.00

    An electromagnet, also known as Ned2, is a type of magnet that uses electricity to produce a magnetic field. Electromagnets are made by winding a wire around a core, such as a piece of iron, and running an electrical current through the wire. This creates a magnetic field around the core, which can be turned on and off by controlling the flow of electricity. Electromagnets are used in a variety of applications, including electric motors, generators, and relays, as well as in scientific and medical equipment. They offer several advantages over permanent magnets, including the ability to produce a much stronger magnetic field and the ability to control the magnetic field with a simple switch. The “Ned2” designation likely refers to a specific brand or model of electromagnet.

  • Line Following Robot Car Kit

    $48.60

    Everyone loves mobile robot 🙂 This is a mobile robot kit based on Maker UNO(Arduino UNO compatible). You can learn electronics, sensors, microcontroller and coding all at once, not to forget having fun too!

  • Little Fuse 125V 10A (LFU-10) 10pcs

    $12.96

    Little Fuse 125V 10A is a type of fuse that is used to protect electrical circuits. Fuses are safety devices that are designed to “break the circuit” in case of an overload or short circuit, preventing damage to the electrical system and potentially dangerous conditions. The Little Fuse 125V 10A specification indicates that the fuse is rated to safely interrupt electrical flow in a circuit that has a maximum voltage of 125 volts and a maximum current of 10 amps. This type of fuse is commonly used in household and light commercial electrical systems to protect against overloading and short circuits. The “Little Fuse” brand is a well-known manufacturer of fuses and other electrical protection devices.

  • Maker UNO Bluetooth Robot Car Kit

    $48.60

    Everyone loves mobile robot 🙂 This is a mobile robot kit based on Maker UNO(Arduino UNO compatible). You can learn electronics, sensors, microcontroller and coding all at once, not to forget having fun too!

    With the beginner friendly Maker UNO as the controller, everyone can build and program this mobile robot.

  • Out Stock
    MeArm Robot Arduino Kit - Orange
    Quick View

    MeArm Robot Arduino Kit

    $112.32

    Enter the world of Robotics Engineering with the MeArm robot arm kit for micro:bit. An easy build kit for ages 11 & up, supplied with all parts/tools.

    The MeArm Arduino Compatible Kit version is an easy-to-build robot arm kit that’s designed to get children (and adults!) learning about technology, engineering and programming. It’s been expressly designed to be easy to build (age 11+) and use.

    At its heart is the Arduino Compatible ESP 8266 WiFi board. This board is a low power board designed specifically for IoT applications that has an on-board Arduino IDE and WiFi. This means that you can create code in any Arduino compatible editor, drop it onto the board and get going straight away and with no additional boards required. Build ‘n’ Play!

  • Out StockQuick View

    MeArm Robot Classic Maker Kit

    $63.72

    Enter the world of Robotics Engineering with the MeArm robot arm Classic Maker Kit. An easy build kit for ages 11 and up is supplied with all parts and tools.

    The MeArm Classic Maker Kit version is an easy-to-build robot arm kit that’s designed to get children (and adults!) learning about technology, engineering and programming. It’s been expressly designed to be easy to build (age 11+) and use.

    The classic version of the MeArm is a blank canvas insomuch that you can use any control board you desire, without having to remove a pre-installed board first. There are a lot of micro-controllers out there and if you have a favourite that our variants don’t cater for, then this is the version for you! It also gives you the freedom to use any type of arm control that will connect to your board, be that joystick, keypad, levers, or sliding potentiometer.

  • Out Stock
    MeArm Robot Micro:Bit Kit - Orange
    Quick View

    MeArm Robot Micro:Bit Kit

    $112.32

    Enter the world of Robotics Engineering with the MeArm robot arm kit for micro:bit. An easy build kit for ages 11 & up, supplied with all parts/tools.

    The MeArm microbit is an easy-to-build robot arm kit that’s designed to get children (and adults!) learning about technology, engineering and programming. It’s been expressly designed to be easy to build (age 11+) and use.

    At its heart is the BBC microbit (sold separately), a low cost computer that has been developed to make learning about computing accessible and fun. It can be controlled directly through the on-board joysticks, or you can learn to code by making it move using one of the programming languages supported by the BBC microbit.

     

  • Out Stock
    Quick View

    MeArm Robot Raspberry Pi Kit

    $112.32

    Enter the world of Robotics Engineering with the MeArm robot arm kit for micro:bit. An easy build kit for ages 11 & up, supplied with all parts/tools.

    The MeArm Raspberry Pi Maker Kit (orange) version is an easy-to-build robot arm kit that’s designed to get children (and adults!) learning about technology, engineering and programming. It’s been expressly designed to be easy to build (age 11+) and use.

    At its heart is the Raspberry Pi (Not included), a small and affordable computer that can be used for learning to code and that can be used as a desktop computer. It can be controlled directly through the on-board joysticks, or you can learn to code by making it move using a variety of languages.

     

  • Out StockQuick View

    Ned2 : Robotic Arm for Education

    $6,350.40

    Ned2 is a robotic arm designed specifically for education and learning. The arm is designed to be easy to use, allowing students to learn about robotics, mechanics, and control systems through hands-on experimentation and projects. The arm features multiple joints and a gripper, allowing it to perform a variety of tasks. It is compatible with a range of programming languages and software platforms, making it accessible to students of different skill levels and backgrounds. The robotic arm is designed to be sturdy and durable, making it suitable for use in educational settings.

  • Niryo Conveyor Belt (Education Set)

    $864.00

    This conveyor is designed to be used with or without the Niryo One: you have the ability to control it with the Niryo One and/or with our controller module that makes it autonomous.

    Prototype an industrial production line with this autonomous conveyor. Easily reproduce a production line.

  • Out Stock
    Quick View

    Niryo NED

    $4,330.80

    We are the official distributor of Niryo Ned in Singapore

    Niryo Ned is a new generation of 6-axis collaborative robot based on open-source technologies designed for Education, Professional Training and Research.

    With the Niryo One, many schools have been able to offer their students to learn Robotics and industry 4.0 directly with a 6-axis robot, open-source and similar in design to industrial robots. The Niryo One is also used in many Research & Development laboratories to test new uses of collaborative robotics.

    Meet now its successor, Ned, which has many improvements.

  • Niryo NED Vision Set

    $1,139.40

    The Vision Set will give to the Niryo Ned the capability of detecting objects and selecting the ones to interact with

    Advanced users, discover the perfect set to work on Image Processing and Artificial Intelligence