ESP8266

  • Out StockQuick View

    ESP8266 ESP-01 WiFi Module

    $1.64

    The ESP8266 ESP-01 is a Wi-Fi module that allows microcontrollers access to a Wi-Fi network. This module is a self-contained SOC (System On a Chip) that doesn’t necessarily need a microcontroller to manipulate inputs and outputs as you would normally do with an Arduino, for example, because the ESP-01 acts as a small computer. Depending on the version of the ESP8266, it is possible to have up to 9 GPIOs (General Purpose Input Output). Thus, we can give a microcontroller internet access like the Wi-Fi shield does to the Arduino, or we can simply program the ESP8266 to not only have access to a Wi-Fi network, but to act as a microcontroller as well. This makes the ESP8266 very versatile, and it can save you some money and space in your projects.

  • ESP8266 ESP12 Module

    $6.00

    ESP8266 ESP-12 Remote Serial Port WIFI Transceiver Wireless Module is developed by Ai-thinker Team. The module supports standard IEEE802.11 b/g/n, complete TCP/IP protocol stack. Users can use the
    add modules to an existing device networking, or building a separate network controller.

  • ESP8266 NodeMCU v2 WiFi Board

    $21.80

    NodeMcu is an open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines. The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board. Power your developement in the fastest way combining it with NodeMcu Firmware!

  • Out StockQuick View

    ESP8266 NodeMCU v3 WiFi Board

    $20.71

    NodeMCU V3 is an open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines. The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board. Power your developement in the fastest way combining it with NodeMcu Firmware!

  • ESP8266 Serial WiFi Wireless Transceiver Module

    $10.90

    ESP8266 Serial Wifi Wireless Transceiver Module is a low-cost, integrated Wi-Fi transceiver module designed for microcontroller projects. It operates on a single-chip SoC (System on Chip) and can be used to add Wi-Fi connectivity to microcontroller projects. The module can be connected to a microcontroller via serial communication, and it supports both station and soft access point modes, allowing it to connect to Wi-Fi networks or create its own network. The module can be programmed using the Arduino platform and has a small form factor, making it suitable for compact projects and wearable devices.

  • NodeMCU Internet of Thing (IoT) Hobby Kit

    $43.60

    NodeMCU is a popular and powerful open source IoT platform. It includes firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module. The term “NodeMCU” by default refers to the firmware rather than the development kits. The firmware uses the Lua scripting language. .

  • Out Stock
    Quick View

    NodeMCU Internet of Thing (IoT) Hobby Kit Set 2

    $49.05

    NodeMCU is a popular and powerful open source IoT platform. It includes firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module. The term “NodeMCU” by default refers to the firmware rather than the development kits. The firmware uses the Lua scripting language. .

  • WeMos D1 NodeMcu V3 CH340

    $10.90

    This is the famous NodeMCU which is based on ESP8266 WiFi SoC. This is version 3 and it is based on ESP-12E (An ESP8266 based WiFi module). NodeMCU is also an open-source firmware and development kit that helps you to prototype your IoT(Internet of Things) product within a few LUA script lines, and of course you can always program it with Arduino IDE.

    Nodemcu V3 WiFi module integrated ESP8266 + additional memory 32M FLASH, USB serial port ch340g WiFi modern ESP8266 + 32MB, the module is based on a wide range of exploration ESP8266 system chip from expressif. WiFi modern ESP8266 + 32MB, compatible with nodemcu board. We add an extra memory size of 32MB. This is better for big library projects. You do not have to worry about the size of the memory. On board there are usb-ttl serial converter ch340g, mini USB socket. DC 4 ~ 9v PowerIn pin VIN. Pitch 2.54mm (0.1 “) 15 x 2-wire pin set. Do not solder. Combine WiFi access point and feature station + microcontrollers using Lua programming language is simple. WiFi Modern ESP8266 + 32MB, provides: FOR arduinO hardware IO. Can be used in the arduin0 IDE event-driven API network application 10 d0-d10, PWM function programming, IIC and SPI communication, in a board WiFi wireless network and ADC (A0, etc. can be used as an access point and / or station, host Server), connect to the Internet, get or upload data, and the developing board can use the mounting board.

     

  • Out StockQuick View

    WeMos D1 R1 WiFi ESP8266 Board

    $16.35

    WeMos-D1R1 IoT development board is an ESP8266-12 based WiFi enabled microprocessor unit on a Arduino-UNO footprint. That means the board looks and works (in most cases) like an UNO. Apparently several shields, sensors and output devices that are manufactured for the Arduino platform will work on the WeMos-D1R1 with the added advantage of builtin WiFi.