Shop
-
ESP8266 NodeMCU v3 WiFi Board
$20.71NodeMCU V3 is an open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines. The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board. Power your developement in the fastest way combining it with NodeMcu Firmware!
-
ESP8266 Serial WiFi Wireless Transceiver Module
$10.90ESP8266 Serial Wifi Wireless Transceiver Module is a low-cost, integrated Wi-Fi transceiver module designed for microcontroller projects. It operates on a single-chip SoC (System on Chip) and can be used to add Wi-Fi connectivity to microcontroller projects. The module can be connected to a microcontroller via serial communication, and it supports both station and soft access point modes, allowing it to connect to Wi-Fi networks or create its own network. The module can be programmed using the Arduino platform and has a small form factor, making it suitable for compact projects and wearable devices.
-
Ethernet Cable (1.5 meter)
$2.18- Exceed ANSI/TIA-568-D.2 Category 6 and ISO 11801 Class E Standards
- Up to 550MHz with 1G/10G-T Speed, Support PoE/PoE+/PoE++ (IEEE 802.3af/at/bt)
- Performance Tested with Fluke and Wired T568B
- Strain Relief and a Flexible Boot Simplify Moves, Additions and Changes
- Stranded Cable and RJ45 Modular Plugs with 50μ” Gold-plated Contacts
-
Use in Patch Panel or Equipment Connections in Enterprise Networks and Data CenterSupport Current and Future Category 6/5e/5 Applications
-
Female to Female 20cm 40P DuPont Color Jumper Wire
$4.36The Female to Female 20cm 40P DuPont Color Jumper Wire is a set of 40 wires that are commonly used in electronics projects and DIY circuits. These jumper wires feature a female connector on both ends and a 20cm length, making them suitable for use with a wide range of electronic components and printed circuit boards (PCBs).
The wires are made of high-quality materials and are designed to provide a secure and reliable connection between components. They are color-coded for easy identification and organization, allowing for quick and easy connections between components in a circuit.
-
Flexible 3D Filament (1.75mm)
$34.88Flexible 3D Filament (1.75mm) is a specialized 3D printing material that is designed to have high flexibility and elasticity, making it ideal for creating objects with a soft, rubbery texture. The filament is made from a mixture of high-quality, eco-friendly materials and has a 1.75mm diameter that allows for precise and consistent extrusion. This filament is compatible with most FDM 3D printers and requires no additional modifications to your machine. Flexible 3D Filament is a great choice for artists, designers, and makers who want to create soft and flexible parts for their projects, such as phone cases, toys, or wearable objects. The filament is available in a variety of colors, making it easy to create prints that match your desired aesthetic.
-
Four-Channel Low Level Trigger Power 5V Relay Module
$10.90This four channels Relay Module can be used to control the lighting, electrical and other equipments through the digital IO port. The digital input circuit is optically isolated from the relay, so your controller is protected from voltage spikes and surges. The module is controlled with 5V signal and they are pre-soldered. A logic “LOW” to the control pin will turn the relay ON.
-
FTDI Breakout Board FT232RL Programmer
$5.45The FTDI Breakout Board FT232RL Programmer is a device used for converting USB signals to serial (TTL-level) signals. It is commonly used for programming microcontrollers and for connecting devices that use a serial interface to a computer through a USB port. The FT232RL is a highly integrated chip that contains all the necessary components for converting USB signals to serial signals and vice versa. The breakout board provides a convenient way to interface with the FT232RL, including a USB connector, pin headers for connecting to other devices, and a set of status LEDs
-
Glow in Dark 3D Filament (1.75mm)
$34.88Glow in Dark 3D Filament (1.75mm) is a special type of 3D printing material that contains phosphorescent particles that emit light in low light conditions. The filament is made from high-quality, eco-friendly materials and has a 1.75mm diameter that allows for precise and consistent extrusion. This filament is compatible with most FDM 3D printers and requires no additional modifications to your machine. Glow in Dark 3D Filament is a great choice for artists, designers, and makers who want to create unique, eye-catching objects that illuminate in the dark. The filament is available in a variety of colors, making it easy to create prints that stand out in low light conditions.
-
H-bridge Stepper Motor Dual DC Motor Driver Controller Board HG7881
$13.08The HG7881 H-Bridge Stepper Motor Dual DC Motor Driver Controller Board is a versatile motor control board designed to drive both stepper motors and DC motors. It uses an H-bridge configuration to control the direction and speed of the connected motors. The HG7881 is capable of driving motors that require up to 40 volts and 3 amps of current, making it suitable for a wide range of applications. It features a compact design, with a size of only 40 x 40 mm, and can be easily integrated into a variety of projects.
-
HC-05 Master / Slave Bluetooth Module
$10.90The HC-05 is a class 2 Bluetooth module designed for transparent wireless serial communication. It is pre-configured as a slave Bluetooth device. Once it is paired to a master Bluetooth device such as PC, smart phones and tablet, its operation becomes transparent to the user. No user code
-
HDMI to HDMI Cable (1.5 meter)
$5.45The HDMI to HDMI Cable (1.5 meter) is a cable used to connect devices that support the HDMI (High-Definition Multimedia Interface) interface, such as Blu-ray players, gaming consoles, streaming devices, and computers. The cable has an HDMI connector on both ends and is 1.5 meters in length, providing ample reach for most applications. The HDMI to HDMI Cable provides a high-quality digital connection that allows for the transfer of audio and video signals between devices. It supports high-definition video resolutions up to 4K, as well as audio formats such as Dolby TrueHD and DTS-HD Master Audio. This means that users can enjoy high-quality video and audio from their connected devices.
-
I2C 16×2 Character LCD Module
$21.80This is another great 16×2 character LCD display with I2C interface. As the pin resources of Arduino controller is limited, your project may be not able to use standard LCD module after connected with a certain quantity of sensors or SD card. However, with this I2C interface LCD module, you will only need 2 pins (SCL and SDA) to display the information. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.
