Shop
-
Infrared LED Receiver Diode
$1.09The Infrared (IR) LED Receiver Diode is a small component that is used to detect and receive IR signals. It is designed to be low-cost, low-power, and compact, making it ideal for a wide range of projects and applications. The IR LED Receiver Diode consists of a small photodiode that is housed in a cylindrical package, with leads that are used to connect it to a circuit. When an IR beam is directed at the diode, it generates a small electrical current that can be processed by a microcontroller or other control unit.
-
Infrared Remote Control Module for Arduino
$9.81The Infrared Remote Control Module for Arduino is a compact and easy-to-use module that allows you to control your Arduino projects with an infrared remote control. This module features a 38kHz IR receiver and can be easily connected to your Arduino board via a 3-pin interface. The module is compatible with most common IR remote controls and supports both NEC and RC5 protocols. With the Infrared Remote Control Module for Arduino, you can add remote control functionality to your projects without the need for complex coding. This module is perfect for creating home automation systems, controlling lights, or adding other forms of remote control to your projects.
-
Integration Ultrasonic Transceiver
$3.27The Integration Ultrasonic Transceiver is a device used for measuring distance and detecting objects using ultrasound. It works by emitting an ultrasonic pulse and measuring the time it takes for the pulse to bounce back from an object, allowing the distance to be calculated. The ultrasonic transceiver is typically used in applications such as distance sensing, object detection, and flow measurement. It has a compact design, making it suitable for use in a variety of projects, including robotics, automation, and instrumentation
-
KY-016 Full Color RGB LED Module
$1.09The KY-016 Full Color RGB LED emits a wide range of different colors by mixing red, green and blue light. Compatible with many popular microcontrollers like Arduino, Raspberry Pi and ESP32
-
L298N Dual Motor Controller
$9.81The L298N Dual Motor Controller is a dual H-bridge motor driver integrated circuit (IC) that is commonly used to control the speed and direction of two DC motors. It can handle motors that require up to 46 volts and 2 amps of current, making it suitable for a wide range of applications. The L298N features an on-board 5V regulator, which can be used to supply power to an external control circuit. It also has a set of control pins for each motor, allowing you to set the speed and direction of each motor independently.
-
Light Sensitive Photo Resistor
$0.55The Light Sensitive Photo Resistor, also known as a photoresistor or light-dependent resistor (LDR), is a passive electronic component that changes its resistance based on the amount of light that falls on it. Photo resistors are used in a variety of applications, including light-activated switches, automatic street lights, and light-sensitive security systems. The photoresistor is made of a material that changes its electrical resistance when exposed to light. When the photoresistor is in the dark, its resistance is high, and when it is exposed to light, its resistance decreases. This change in resistance can be used to control the flow of current in a circuit, allowing for the detection of light levels and the control of light-activated devices.
-
Line Following Robot Car Kit
$49.05Everyone loves mobile robot 🙂 This is a mobile robot kit based on Maker UNO(Arduino UNO compatible). You can learn electronics, sensors, microcontroller and coding all at once, not to forget having fun too!
-
Little Fuse 125V 10A (LFU-10) 10pcs
$13.08Little Fuse 125V 10A is a type of fuse that is used to protect electrical circuits. Fuses are safety devices that are designed to “break the circuit” in case of an overload or short circuit, preventing damage to the electrical system and potentially dangerous conditions. The Little Fuse 125V 10A specification indicates that the fuse is rated to safely interrupt electrical flow in a circuit that has a maximum voltage of 125 volts and a maximum current of 10 amps. This type of fuse is commonly used in household and light commercial electrical systems to protect against overloading and short circuits. The “Little Fuse” brand is a well-known manufacturer of fuses and other electrical protection devices.
-
LoRa Arduino Shield with Antenna
$43.60LoRa is an acronym for Long Range and it is a wireless technology where a low powered sender transmit small data packages (0.3 kbps to 5.5 kbps) to a receiver over a long distance.. LoRa uses a radio modulation technique (spread spectrum) that can be generated by Semtech LoRa transceiver chips.
LoRa modulation technique allows long range communication of small amounts of data (which means a low bandwidth), high immunity to interference, while minimising power consumption. So, it allows long distance communication with low power requirements
-
Makeblock mBot v1.1 Robot Kit (Bluetooth)
$155.87The Makeblock mBot V1.1 Robot Kit (Bluetooth) is an educational robot kit designed for children and beginners to learn about robotics, electronics, and programming. The kit includes all the components needed to build a basic robotic car, including a mainboard, servo motors, wheels, sensors, and a Bluetooth module for wireless control. The kit also comes with a user-friendly graphical programming software, mBlock, which is based on Scratch 3.0 and allows users to easily program and control their robots. The Makeblock mBot V1.1 Robot Kit is a great way to introduce children and beginners to the world of robotics and help them develop important STEM skills.
-
Maker UNO Bluetooth Robot Car Kit
$49.05Everyone loves mobile robot 🙂 This is a mobile robot kit based on Maker UNO(Arduino UNO compatible). You can learn electronics, sensors, microcontroller and coding all at once, not to forget having fun too!
With the beginner friendly Maker UNO as the controller, everyone can build and program this mobile robot.
-
Maker UNO Edu Kit (Arduino Compatible)
$27.25On top of the features that comes with Maker UNO (12 LEDs, 1 speaker & 1 push button), this starter kit includes a Maker UNO, USB micro-B cable for power and USB connection, a small breadboard and other component for experiments to learn electronics and coding. Digital output using LEDs & driving a small motor, Digital input using push button, Analog input with potentiometer, LDR for light detection and more. It also comes in a nice plastic box to keep all your things.
