Shop
-
Breadboard Trim Potentiometer – 10K
$1.64Breadboard trim potentiometer – 10K
These potentiometers are great for project prototyping. The three legs are spaced to fit perfectly in our range of solderless breadboards, giving each leg its own lane for hooking up to your microcontroller with jumper wires.
-
DHT11 Temperature and Humidity Sensor
$5.45The DHT11 Temperature and Humidity Sensor is a low-cost and widely used sensor for measuring temperature and humidity in various applications. It is a combined digital temperature and humidity sensor that provides accurate and reliable data in a compact package. The DHT11 uses a capacitive humidity sensing element and a thermistor to measure the relative humidity and temperature, respectively. The sensor provides a digital output via a single wire interface, making it easy to connect to a microcontroller or other digital circuit. The DHT11 supports a temperature range of 0°C to 50°C and a humidity range of 20% to 90% relative humidity, making it suitable for use in a wide range of indoor and outdoor environments.
-
DHT11 Temperature and Humidity Sensor Module
$8.72The DHT11 temperature and humidity sensor module is an electronic device used to measure the temperature and humidity of a surrounding environment. The module uses a combined digital temperature and humidity sensor that measures both parameters using a single device.
The DHT11 sensor module is designed to interface with microcontroller boards, such as the popular Arduino platform, and typically contains the DHT11 sensor and a few other electronic components that allow it to communicate with the microcontroller.
-
DHT22 Temperature and Humidity Sensor
$14.17The DHT22 Temperature and Humidity Sensor is a highly accurate and reliable digital sensor for measuring temperature and humidity in various applications. It is an upgrade from the DHT11 sensor, offering improved accuracy and range, and is widely used in a variety of applications such as home automation, weather monitoring, and industrial control. The DHT22 uses a capacitive humidity sensing element and a thermistor to measure the relative humidity and temperature, respectively. The sensor provides a digital output via a single wire interface, making it easy to connect to a microcontroller or other digital circuit.
-
DHT22 Temperature and Humidity Sensor Module
$17.44DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). It’s fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.
-
Dragino NB-IoT Shield-B5
$65.40NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services
-
Electronic 10k Slide Potentiometer Model
$5.45A potentiometer module for Arduino is an electronic component that allows for the measurement of analog values by converting the position of a rotating shaft or slider into a electrical signal. Potentiometers are commonly used to control the brightness of a light, the volume of an audio system, or to sense the position of a joystick, among other applications.
A potentiometer module for Arduino is a convenient and easy-to-use component that is specifically designed to be used with the popular open-source electronics platform. The module typically contains a potentiometer, which is a variable resistor, as well as a few other electronic components that allow it to interface with the Arduino board.
-
ESP32 Development Board
$21.80ESP32 Development Board is made with the official WROOM32 module,esp,esp 32,wifi esp
-
ESP32-CAM IoT Kit
$49.05ESP32-CAM is an ESP32 Wireless IoT Vision Development Board in a very small form factor, designed to be used in various IoT projects, such as home smart devices, industrial wireless control, wireless monitoring, QR wireless identification and so on.
It supports deep sleep mode with power consumption as low as 6mA at 5V which makes it ideal for portable IoT applications. It’s suitable as a low-cost CCTV camera.
Package Included:
- 1 x ESP32-CAM Module
- 1 x Camera Module OV2640 2MP
- 1 x FT232RL Module
- 1 x Female to Female Dupont Jumper Wires
- 1 x 16GB microSD Card
-
ESP8266 ESP-01 WiFi Module
$1.64The ESP8266 ESP-01 is a Wi-Fi module that allows microcontrollers access to a Wi-Fi network. This module is a self-contained SOC (System On a Chip) that doesn’t necessarily need a microcontroller to manipulate inputs and outputs as you would normally do with an Arduino, for example, because the ESP-01 acts as a small computer. Depending on the version of the ESP8266, it is possible to have up to 9 GPIOs (General Purpose Input Output). Thus, we can give a microcontroller internet access like the Wi-Fi shield does to the Arduino, or we can simply program the ESP8266 to not only have access to a Wi-Fi network, but to act as a microcontroller as well. This makes the ESP8266 very versatile, and it can save you some money and space in your projects.
-
ESP8266 ESP12 Module
$6.00ESP8266 ESP-12 Remote Serial Port WIFI Transceiver Wireless Module is developed by Ai-thinker Team. The module supports standard IEEE802.11 b/g/n, complete TCP/IP protocol stack. Users can use the
add modules to an existing device networking, or building a separate network controller. -
ESP8266 NodeMCU v2 WiFi Board
$21.80NodeMcu is an open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines. The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board. Power your developement in the fastest way combining it with NodeMcu Firmware!
