Arduino
-
Arduino Nano v3 with free USB cable (Clone)
$16.35Arduino Nano v3 (Clone) is a compact, breadboard-friendly version of the Arduino microcontroller board. It features an ATmega328P microcontroller and operates at 16 MHz with 32KB of flash memory, 2KB of SRAM, and 1KB of EEPROM. It has 14 digital input/output pins and 8 analog input pins. The board can be powered through the USB connection or an external power supply. The package includes a free USB cable for connecting the board to a computer for programming and power supply.
-
Arduino Pro Mini (Clone)
$8.72The Arduino Pro Mini is a compact, low-power microcontroller board based on the ATmega328P chip. It is designed for projects that require a smaller form factor or a low power consumption, as it only has 14 digital input/output pins, 8 analog inputs, a 16 MHz quartz crystal, and a mini USB connection for programming. This is a clone of the original Arduino Pro Mini, which means that it is a less expensive alternative that still has the same basic functionality as the original. Note that this board does not come with a USB connection, so you will need an external USB to serial converter to program it.
-
Arduino UNO R3 Board with Free USB Cable (Clone)
$26.16The Arduino UNO R3 Board is a clone version of the popular open-source microcontroller board based on the ATmega328P. It comes with a free USB cable and features 14 digital input/output pins, 6 analog inputs, a 16 MHz quartz crystal, and a micro-USB connection for programming. This board is suitable for beginners and advanced users who want to control a wide range of devices with their own software.
-
DHT11 Temperature and Humidity Sensor Module
$8.72The DHT11 temperature and humidity sensor module is an electronic device used to measure the temperature and humidity of a surrounding environment. The module uses a combined digital temperature and humidity sensor that measures both parameters using a single device.
The DHT11 sensor module is designed to interface with microcontroller boards, such as the popular Arduino platform, and typically contains the DHT11 sensor and a few other electronic components that allow it to communicate with the microcontroller.
-
Electronic 10k Slide Potentiometer Model
$5.45A potentiometer module for Arduino is an electronic component that allows for the measurement of analog values by converting the position of a rotating shaft or slider into a electrical signal. Potentiometers are commonly used to control the brightness of a light, the volume of an audio system, or to sense the position of a joystick, among other applications.
A potentiometer module for Arduino is a convenient and easy-to-use component that is specifically designed to be used with the popular open-source electronics platform. The module typically contains a potentiometer, which is a variable resistor, as well as a few other electronic components that allow it to interface with the Arduino board.
-
ESP8266 Serial WiFi Wireless Transceiver Module
$10.90ESP8266 Serial Wifi Wireless Transceiver Module is a low-cost, integrated Wi-Fi transceiver module designed for microcontroller projects. It operates on a single-chip SoC (System on Chip) and can be used to add Wi-Fi connectivity to microcontroller projects. The module can be connected to a microcontroller via serial communication, and it supports both station and soft access point modes, allowing it to connect to Wi-Fi networks or create its own network. The module can be programmed using the Arduino platform and has a small form factor, making it suitable for compact projects and wearable devices.
-
HC-05 Master / Slave Bluetooth Module
$10.90The HC-05 is a class 2 Bluetooth module designed for transparent wireless serial communication. It is pre-configured as a slave Bluetooth device. Once it is paired to a master Bluetooth device such as PC, smart phones and tablet, its operation becomes transparent to the user. No user code
-
Infrared Remote Control Module for Arduino
$9.81The Infrared Remote Control Module for Arduino is a compact and easy-to-use module that allows you to control your Arduino projects with an infrared remote control. This module features a 38kHz IR receiver and can be easily connected to your Arduino board via a 3-pin interface. The module is compatible with most common IR remote controls and supports both NEC and RC5 protocols. With the Infrared Remote Control Module for Arduino, you can add remote control functionality to your projects without the need for complex coding. This module is perfect for creating home automation systems, controlling lights, or adding other forms of remote control to your projects.
-
Line Following Robot Car Kit
$49.05Everyone loves mobile robot 🙂 This is a mobile robot kit based on Maker UNO(Arduino UNO compatible). You can learn electronics, sensors, microcontroller and coding all at once, not to forget having fun too!
-
LoRa Arduino Shield with Antenna
$43.60LoRa is an acronym for Long Range and it is a wireless technology where a low powered sender transmit small data packages (0.3 kbps to 5.5 kbps) to a receiver over a long distance.. LoRa uses a radio modulation technique (spread spectrum) that can be generated by Semtech LoRa transceiver chips.
LoRa modulation technique allows long range communication of small amounts of data (which means a low bandwidth), high immunity to interference, while minimising power consumption. So, it allows long distance communication with low power requirements
-
Maker UNO Bluetooth Robot Car Kit
$49.05Everyone loves mobile robot 🙂 This is a mobile robot kit based on Maker UNO(Arduino UNO compatible). You can learn electronics, sensors, microcontroller and coding all at once, not to forget having fun too!
With the beginner friendly Maker UNO as the controller, everyone can build and program this mobile robot.
-
Maker UNO Edu Kit (Arduino Compatible)
$27.25On top of the features that comes with Maker UNO (12 LEDs, 1 speaker & 1 push button), this starter kit includes a Maker UNO, USB micro-B cable for power and USB connection, a small breadboard and other component for experiments to learn electronics and coding. Digital output using LEDs & driving a small motor, Digital input using push button, Analog input with potentiometer, LDR for light detection and more. It also comes in a nice plastic box to keep all your things.
