Arduino
-
MeArm Robot Arduino Kit
$113.36Enter the world of Robotics Engineering with the MeArm robot arm kit for micro:bit. An easy build kit for ages 11 & up, supplied with all parts/tools.
The MeArm Arduino Compatible Kit version is an easy-to-build robot arm kit that’s designed to get children (and adults!) learning about technology, engineering and programming. It’s been expressly designed to be easy to build (age 11+) and use.
At its heart is the Arduino Compatible ESP 8266 WiFi board. This board is a low power board designed specifically for IoT applications that has an on-board Arduino IDE and WiFi. This means that you can create code in any Arduino compatible editor, drop it onto the board and get going straight away and with no additional boards required. Build ‘n’ Play!
-
NodeMCU Internet of Thing (IoT) Hobby Kit
$43.60NodeMCU is a popular and powerful open source IoT platform. It includes firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module. The term “NodeMCU” by default refers to the firmware rather than the development kits. The firmware uses the Lua scripting language. .
-
NodeMCU Internet of Thing (IoT) Hobby Kit Set 2
$49.05NodeMCU is a popular and powerful open source IoT platform. It includes firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module. The term “NodeMCU” by default refers to the firmware rather than the development kits. The firmware uses the Lua scripting language. .
-
Obstacle Avoidance Robot Car Kit
$49.05Everyone loves mobile robot 🙂 This is a mobile robot kit based on Maker UNO(Arduino UNO compatible). You can learn electronics, sensors, microcontroller and coding all at once, not to forget having fun too!
-
Official Arduino Motor Shield R3
Original price was: $49.05.$32.70Current price is: $32.70.The Arduino Motor Shield allows your Arduino to drive DC and stepper motors, relays, and solenoids.
-
Official Arduino UNO R3 Board with Free USB Cable
Original price was: $49.05.$38.15Current price is: $38.15.The Arduino UNO R3 Board is a popular open-source microcontroller board based on the ATmega328P. It comes with a free USB cable and features 14 digital input/output pins, 6 analog inputs, a 16 MHz quartz crystal, and a micro-USB connection for programming. This board is suitable for beginners and advanced users who want to control a wide range of devices with their own software.
-
Photoresistor Light Sensor Module for Arduino
$3.27A photoresistor light sensor module for Arduino is a component that allows for the measurement of ambient light levels using a photoresistor. Photoresistors, also known as light-dependent resistors (LDRs), are electronic components that change resistance based on the amount of light that they receive.
A photoresistor light sensor module for Arduino is designed to be used with the popular open-source electronics platform and typically contains a photoresistor and a few other electronic components that allow it to interface with the Arduino board. The module is connected to the Arduino board through its analog input pins, which allow it to measure the analog voltage produced by the photoresistor.
-
Raindrops Detection Module – Rain Weather Sensor Module for Arduino
$5.45- A raindrops detection module, also known as a rain weather sensor module, is an electronic component used to detect the presence of rain. The module is designed to interface with microcontroller boards, such as the popular Arduino platform, and typically contains a rain sensor and a few other electronic components that allow it to communicate with the microcontroller.
The rain sensor in the module works by detecting changes in electrical conductivity due to the presence of water droplets on its surface. When water droplets come into contact with the sensor, they change the electrical conductivity of the sensor, which can be detected by the microcontroller board.
- A raindrops detection module, also known as a rain weather sensor module, is an electronic component used to detect the presence of rain. The module is designed to interface with microcontroller boards, such as the popular Arduino platform, and typically contains a rain sensor and a few other electronic components that allow it to communicate with the microcontroller.
-
Soil Moisture Sensor Module – Hygrometer Humidity Detector for Arduino Watering
$8.72A soil moisture sensor module is an electronic device used to measure the water content in soil. It works by measuring the electrical resistance of the soil, which changes with the amount of water present. The hygrometer humidity detector component of the module detects the relative humidity of the air, which can impact soil moisture levels. The module can be used with an Arduino microcontroller to create a smart watering system for plants. The system can use the data from the soil moisture sensor and hygrometer to determine when to water the plants and how much water to provide, ensuring optimal growing conditions.
-
The Arduino Starter Kit (Official Kit from Arduino)
$158.05This official Arduino Starter Kit (Original) with 170 pages of Arduino Project book walks us through the basics in a hands on way, with creative projects we build by learning, thanks to a selection of the most common and useful electronic components with a selection of 15 projects that start simple, in order to learn the basics of electronics, to more complex ones, using components that lets you control the physical world through various sensors. Once we have mastered this knowledge, we will have a palette of software and circuits that we can use to create something beautiful and make someone smile with what we invent.
-
Tilt Sensor
$3.27A tilt sensor, also known as a tilt switch, is a type of switch that is used to detect the angle of inclination of an object with respect to the ground or gravity. The sensor works by using the principle of gravity to change the position of a ball or liquid inside the switch, which in turn changes the electrical contact and triggers the switch.
Tilt sensors are typically small, compact devices that can be easily integrated into a variety of applications. They are commonly used in mobile devices, such as smartphones and tablet computers, to detect the orientation of the device and adjust the screen accordingly.
-
TTP223B Capacitive Touch Sensor
$1.09This touch sensor is a capacitive touch sensor module and the sensor driver is based on the driver IC TTP223. This capacitive touch sensor is an ideal alternative for the old-fashioned keypads and buttons. The operating voltage of the TTP223 IC is from the 2V to 5.5V and the power consumption of the touch sensor is very low. Due to the inexpensive, low power consumption, and easy to integrate support, the touch sensor with TTP223 becomes popular in the capacitive touch sensor segment.
