Components
-
-
10F Capacitor
$14.17The 10F Capacitor is an electronic component used for storing electrical energy. It consists of two metal plates separated by a dielectric material, and is capable of storing and releasing electrical charge as needed. Capacitors are widely used in electronic circuits for filtering, decoupling, and smoothing signals, as well as for energy storage and power management. The 10F Capacitor is a high-capacity capacitor, meaning it is capable of storing a large amount of electrical charge. This makes it ideal for use in applications that require large amounts of energy storage, such as power supplies, energy-storage systems, and backup power systems.
-
-
1N4007 Rectifier Diode
$0.55The 1N4007 Rectifier Diode is a widely used component in electronic circuits for converting alternating current (AC) to direct current (DC). It consists of a semiconductor material with a P-N junction that acts as a one-way valve for electrical current, allowing current to flow in only one direction. The 1N4007 diode is rated for a peak reverse voltage of 1,000 volts (1kV) and a continuous forward current of 1 ampere (1A), making it suitable for use in a wide range of applications. The diode is widely used in power supplies, voltage regulators, rectifier circuits, and other applications where it is necessary to convert AC to DC.
-
1N4148 Logic Zener Diodes
$0.551N4148 Logic Zener Diodes are small, high-speed switching diodes that are widely used in digital and analog circuits. They are designed to regulate the voltage across a circuit and maintain a constant voltage, regardless of changes in current. The diodes are constructed with a Zener junction, which allows them to function as voltage regulators. Whether you’re building a digital or analog circuit, 1N4148 Logic Zener Diodes are a versatile and essential component for your project.
-
2-Pin Rocker Boat Switch
$1.64A 2-Pin Rocker Boat Switch is a switch used for turning electrical devices on and off. It is designed for use in boats and other harsh environments where water resistance is important. The switch has two pins for connecting to the power source and the device being controlled, and a rocker mechanism for manually turning the switch on and off. The switch is usually made of durable materials to withstand the harsh conditions of marine environments.
-
3mm LED (Red,Green,Blue,Yellow,white)
$0.22The 3mm LED (Light Emitting Diode) is a compact and efficient light source that is widely used in a variety of electronic projects. It consists of a small, transparent package that houses a semiconductor chip that emits light when a current is passed through it. The 3mm LED is compact and lightweight, making it ideal for use in small and portable devices, and its low power consumption makes it suitable for use in battery-powered applications. The LED is available in a range of colors, including red, green, blue, yellow and white, and is compatible with a variety of voltage and current levels, making it easy to integrate into your electronic projects.ays, lighting, and alarms.
-
-
5mm Infrared LED Sender
$1.09The 5mm Infrared (IR) LED Sender is a small, low-power component that is used to transmit IR signals. It consists of an infrared LED that is housed in a small cylindrical package, with leads that are used to connect it to a circuit. IR LED senders are commonly used in remote control systems, such as those found in televisions, DVD players, and other consumer electronics. The IR LED sender emits an IR beam that is picked up by a nearby receiver, which converts the signals back into electrical signals that can be processed by a microcontroller or other control unit.
-
5mm LED (Red,Green,Blue,Yellow,white)
$0.44A red 5mm LED (Light Emitting Diode) is a small, solid-state device that emits light when a voltage is applied across its terminals. The LED has a diameter of 5mm, making it compact and suitable for use in a wide range of electronic projects and applications. It typically has a low voltage drop and high brightness, making it an efficient source of light. The LED is often used as a visual indicator in circuits, and can be used in a variety of applications, including displays, lighting, and alarms.
-
8×8 LED Matrix Display (Red)
$2.18The 8×8 LED Matrix Display (Red) is a compact and versatile display module that is widely used in a variety of electronic projects. It consists of 64 individual red LEDs arranged in an 8×8 matrix, and is capable of displaying a wide range of patterns, characters, and images. The display is compatible with a range of control signals and interfaces, making it easy to integrate into your electronic projects. The compact design and low power consumption of the 8×8 LED Matrix Display make it ideal for use in portable and battery-powered devices, such as handheld games, toys, and wearable electronics. Whether you need to display simple patterns, text, or even animations, the 8×8 LED Matrix Display (Red) provides a simple and effective solution for adding visual output to your electronic projects. -
Basic 16×2 Character LCD – Black on Green 5V
$4.91The Basic 16×2 Character LCD (Black on Green 5V) is a compact and easy-to-use display module that is widely used in a variety of electronic projects. It features a 16-character by 2-line display, with each character consisting of 5×8 pixels. The display is backlit with green LED lighting, making it easy to read in low light conditions. The display is powered by a 5V supply, and is compatible with a range of microcontrollers and interfaces, making it easy to integrate into your projects. The LCD module is a cost-effective and convenient solution for adding visual output to your projects, whether you need to display simple text, menus, or data.
-
Breadboard Trim Potentiometer – 10K
$1.64Breadboard trim potentiometer – 10K
These potentiometers are great for project prototyping. The three legs are spaced to fit perfectly in our range of solderless breadboards, giving each leg its own lane for hooking up to your microcontroller with jumper wires.
-
Four-Channel Low Level Trigger Power 5V Relay Module
$10.90This four channels Relay Module can be used to control the lighting, electrical and other equipments through the digital IO port. The digital input circuit is optically isolated from the relay, so your controller is protected from voltage spikes and surges. The module is controlled with 5V signal and they are pre-soldered. A logic “LOW” to the control pin will turn the relay ON.
-
I2C 16×2 Character LCD Module
$21.80This is another great 16×2 character LCD display with I2C interface. As the pin resources of Arduino controller is limited, your project may be not able to use standard LCD module after connected with a certain quantity of sensors or SD card. However, with this I2C interface LCD module, you will only need 2 pins (SCL and SDA) to display the information. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.
-
Infrared LED Receiver Diode
$1.09The Infrared (IR) LED Receiver Diode is a small component that is used to detect and receive IR signals. It is designed to be low-cost, low-power, and compact, making it ideal for a wide range of projects and applications. The IR LED Receiver Diode consists of a small photodiode that is housed in a cylindrical package, with leads that are used to connect it to a circuit. When an IR beam is directed at the diode, it generates a small electrical current that can be processed by a microcontroller or other control unit.
-
KY-016 Full Color RGB LED Module
$1.09The KY-016 Full Color RGB LED emits a wide range of different colors by mixing red, green and blue light. Compatible with many popular microcontrollers like Arduino, Raspberry Pi and ESP32
-
Little Fuse 125V 10A (LFU-10) 10pcs
$13.08Little Fuse 125V 10A is a type of fuse that is used to protect electrical circuits. Fuses are safety devices that are designed to “break the circuit” in case of an overload or short circuit, preventing damage to the electrical system and potentially dangerous conditions. The Little Fuse 125V 10A specification indicates that the fuse is rated to safely interrupt electrical flow in a circuit that has a maximum voltage of 125 volts and a maximum current of 10 amps. This type of fuse is commonly used in household and light commercial electrical systems to protect against overloading and short circuits. The “Little Fuse” brand is a well-known manufacturer of fuses and other electrical protection devices.
-
Metal Push Button, Momentary (Self-reset), 3V, Green LED, Black Body
$2.73A Metal Push Button, Momentary (Self-reset), 3V, Green LED, Black Body is a tactile switch designed for momentary activation. It features a sturdy metal construction with a black body, providing durability and a sleek appearance. The button is equipped with a built-in green LED, which emits a vibrant green light when pressed. It operates at a voltage of 3V, making it suitable for various electronic applications. This push button is designed to automatically reset to its original position after being pressed, ensuring momentary activation and quick functionality.
-
NPN Bipolar Transistor – 2N2222
$1.09The 2N2222 is a type of NPN bipolar transistor, a type of semiconductor device used as an amplifier or switch in electronic circuits. The 2N2222 has three pins: the collector, the base, and the emitter. When a voltage is applied to the base, it controls the flow of current between the collector and emitter. This allows the 2N2222 to act as a switch or amplifier in a circuit. The 2N2222 is a popular choice for electronic projects due to its low cost, ease of use, and versatility.
-
One Channel Relay
$5.45The One Channel relay module is suitable for SCM development, home appliance control. It is with 5V~12V TIL control signal which can control DC / AC signal. The module is perfect for common Arduino application. Useful to control a motor, a led strip, or any other module using Arduino. How to use it: Just connect a digital output of your Arduino to your relay module, and you can control a power-demanding appliance with the digital signal provided by your Arduino.
-
Piezo Buzzer (Small)
$1.09The Piezo Buzzer (Small) is a compact and convenient audio signaling device that is widely used in a variety of electronic applications. It consists of a piezoelectric element that produces a high-pitched, audible tone when supplied with an electrical voltage. The buzzer is small and lightweight, making it ideal for use in portable and compact electronic devices. The buzzer features two wire leads for easy integration into your circuit, and is compatible with a wide range of voltages and frequencies, making it suitable for use in a variety of projects and applications.
-
Potentiometer
$2.18A potentiometer is a manually adjustable variable resistor with 3 terminals. Two of the terminals are connected to the opposite ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The potentiometer essentially functions as a variable resistance divider. The resistive element can be seen as two resistors in series (the total potentiometer resistance), where the wiper position determines the resistance ratio of the first resistor to the second resistor. If a reference voltage is applied across the end terminals, the position of the wiper determines the output voltage of the potentiometer.
-
Push Button Switch [12mmx12mm]
$0.55The 12mmx12mm Push Button Switch is a compact, momentary switch designed for use in a wide range of electronic applications. It features a 12mm x 12mm body and a smooth, easy-to-press button that provides a satisfying tactile response. The switch is designed for easy installation and features two solder lugs for connecting to your circuit. The switch is suitable for a wide range of voltages and currents, making it ideal for use in a variety of electronic projects, including control panels, toys, and consumer electronics. The 12mmx12mm Push Button Switch is a reliable and durable switch that provides a simple and convenient way to add input controls to your electronic projects.
