Raspberry Pi High Quality Camera

The Raspberry Pi High Quality Camera is the latest camera accessory from Raspberry Pi. It offers higher resolution (12 megapixels, compared to 8 megapixels), and sensitivity (approximately 50% greater area per pixel for improved low-light performance) than the existing Camera Module v2, and is designed to work with interchangeable lenses in both C- and CS-mount form factors. 

In stock


  • 12.3-Megapixel high-resolution Sony IMX477 sensor
  • 1.55μm × 1.55μm Pixel Size – double the pixel area of IMX219 for improved low-light performance
  • Back-illuminated sensor architecture for improved sensitivity
  • Support for different C- and CS-mount lenses
  • Integrated back-focus adjustment ring and tripod mount

Interchangeable lenses

The High Quality Camera is designed to accept CS-mount lenses and, with the supplied adapter, C-mount lenses. The CGL 6 mm CS-mount and 16 mm C-mount lenses are examples of third-party products that are compatible with the High Quality Camera; see step-by-step instructions for fitting these CS-mount and C-mount lenses.


  • Sony IMX477R stacked, back-illuminated sensor, 12.3 megapixels, 7.9 mm sensor diagonal, 1.55 μm ×
  • 1.55 μm pixel size
  • Ouput: RAW12/10/8, COMP8
  • Back focus: Adjustable (12.5 mm–22.4 mm)
  • Lens standards: C-mount, CS-mount (C-CS adapter included)
  • IR cut filter: Integrated
  • Ribbon cable length: 200 mm
  • Tripod mount: 1/4”-20


Camera board, FPC cable, lens mounting and C to CS-mount adaptor

Write Your Own Review
You're reviewing:Raspberry Pi High Quality Camera
Your Rating
We found other products you might like!