Module
-
DHT11 Temperature and Humidity Sensor Module
$8.64The DHT11 temperature and humidity sensor module is an electronic device used to measure the temperature and humidity of a surrounding environment. The module uses a combined digital temperature and humidity sensor that measures both parameters using a single device.
The DHT11 sensor module is designed to interface with microcontroller boards, such as the popular Arduino platform, and typically contains the DHT11 sensor and a few other electronic components that allow it to communicate with the microcontroller.
-
DHT22 Temperature and Humidity Sensor Module
$17.28DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). It’s fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.
-
ESP8266 ESP12 Module
$5.94ESP8266 ESP-12 Remote Serial Port WIFI Transceiver Wireless Module is developed by Ai-thinker Team. The module supports standard IEEE802.11 b/g/n, complete TCP/IP protocol stack. Users can use the
add modules to an existing device networking, or building a separate network controller. -
ESP8266 Serial WiFi Wireless Transceiver Module
$10.80ESP8266 Serial Wifi Wireless Transceiver Module is a low-cost, integrated Wi-Fi transceiver module designed for microcontroller projects. It operates on a single-chip SoC (System on Chip) and can be used to add Wi-Fi connectivity to microcontroller projects. The module can be connected to a microcontroller via serial communication, and it supports both station and soft access point modes, allowing it to connect to Wi-Fi networks or create its own network. The module can be programmed using the Arduino platform and has a small form factor, making it suitable for compact projects and wearable devices.
-
HC-05 Master / Slave Bluetooth Module
$10.80The HC-05 is a class 2 Bluetooth module designed for transparent wireless serial communication. It is pre-configured as a slave Bluetooth device. Once it is paired to a master Bluetooth device such as PC, smart phones and tablet, its operation becomes transparent to the user. No user code
-
I2C 16×2 Character LCD Module
$21.60This is another great 16×2 character LCD display with I2C interface. As the pin resources of Arduino controller is limited, your project may be not able to use standard LCD module after connected with a certain quantity of sensors or SD card. However, with this I2C interface LCD module, you will only need 2 pins (SCL and SDA) to display the information. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.
-
Infrared Remote Control Module for Arduino
$9.72The Infrared Remote Control Module for Arduino is a compact and easy-to-use module that allows you to control your Arduino projects with an infrared remote control. This module features a 38kHz IR receiver and can be easily connected to your Arduino board via a 3-pin interface. The module is compatible with most common IR remote controls and supports both NEC and RC5 protocols. With the Infrared Remote Control Module for Arduino, you can add remote control functionality to your projects without the need for complex coding. This module is perfect for creating home automation systems, controlling lights, or adding other forms of remote control to your projects.
-
Photoresistor Light Sensor Module for Arduino
$3.24A photoresistor light sensor module for Arduino is a component that allows for the measurement of ambient light levels using a photoresistor. Photoresistors, also known as light-dependent resistors (LDRs), are electronic components that change resistance based on the amount of light that they receive.
A photoresistor light sensor module for Arduino is designed to be used with the popular open-source electronics platform and typically contains a photoresistor and a few other electronic components that allow it to interface with the Arduino board. The module is connected to the Arduino board through its analog input pins, which allow it to measure the analog voltage produced by the photoresistor.
-
PIR Motion Sensor Module – SR501
$6.48The PIR Motion Sensor Module – SR501 is a device used to detect motion in a room or area. It operates by using a passive infrared sensor to detect changes in the infrared radiation levels in its field of view, indicating the presence of a moving object. The module is small and compact, making it suitable for a range of applications, such as home automation, security systems, and robotics. The module outputs a digital signal, making it easy to interface with microcontrollers and other electronics.
-
Potentiometer Module for Arduino
$3.24A potentiometer module for Arduino is an electronic component that allows for the measurement of analog values by converting the position of a rotating shaft or slider into a electrical signal. Potentiometers are commonly used to control the brightness of a light, the volume of an audio system, or to sense the position of a joystick, among other applications.
A potentiometer module for Arduino is a convenient and easy-to-use component that is specifically designed to be used with the popular open-source electronics platform. The module typically contains a potentiometer, which is a variable resistor, as well as a few other electronic components that allow it to interface with the Arduino board.
-
Raindrops Detection Module – Rain Weather Sensor Module for Arduino
$5.40- A raindrops detection module, also known as a rain weather sensor module, is an electronic component used to detect the presence of rain. The module is designed to interface with microcontroller boards, such as the popular Arduino platform, and typically contains a rain sensor and a few other electronic components that allow it to communicate with the microcontroller.
The rain sensor in the module works by detecting changes in electrical conductivity due to the presence of water droplets on its surface. When water droplets come into contact with the sensor, they change the electrical conductivity of the sensor, which can be detected by the microcontroller board.
- A raindrops detection module, also known as a rain weather sensor module, is an electronic component used to detect the presence of rain. The module is designed to interface with microcontroller boards, such as the popular Arduino platform, and typically contains a rain sensor and a few other electronic components that allow it to communicate with the microcontroller.
-
Raspberry Pi Camera Module v2 (8MP)
$39.96The Raspberry Pi Camera Module v2 is a high quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It’s capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video. It attaches to Pi by way of one of the small sockets on the board upper surface and uses the dedicated CSI interface, designed especially for interfacing to cameras. The board itself is tiny, at around 25mm x 23mm x 9mm. It also weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. It connects to Raspberry Pi by way of a short ribbon cable.
