Boards

  • Out Stock
    Quick View

    Arduino LilyPad LiPower (Clone)

    $15.12

    Arduino LilyPad LiPower (Clone) is a wearable microcontroller board designed for e-textile projects and wearable technology. It features an ATmega328P microcontroller and operates at 8 MHz with 32KB of flash memory. It has 14 digital input/output pins and 8 analog input pins. The board is designed to be powered by a Li-Polymer battery and features a voltage regulator to ensure stable power supply to the microcontroller. The board has a compact and washable design, making it suitable for use in wearable and e-textile projects.

  • Arduino Nano v3 with free USB cable (Clone)

    $12.96

    Arduino Nano v3 (Clone) is a compact, breadboard-friendly version of the Arduino microcontroller board. It features an ATmega328P microcontroller and operates at 16 MHz with 32KB of flash memory, 2KB of SRAM, and 1KB of EEPROM. It has 14 digital input/output pins and 8 analog input pins. The board can be powered through the USB connection or an external power supply. The package includes a free USB cable for connecting the board to a computer for programming and power supply.

  • Out StockQuick View

    Dragino NB-IoT Shield-B5

    $64.80

    NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services

  • ESP32 Development Board

    $21.60

    ESP32 Development Board is made with the official WROOM32 module,esp,esp 32,wifi esp

  • ESP8266 ESP12 Module

    $5.94

    ESP8266 ESP-12 Remote Serial Port WIFI Transceiver Wireless Module is developed by Ai-thinker Team. The module supports standard IEEE802.11 b/g/n, complete TCP/IP protocol stack. Users can use the
    add modules to an existing device networking, or building a separate network controller.

  • LoRa Arduino Shield with Antenna

    $43.20

    LoRa is an acronym for Long Range and it is a wireless technology where a low powered sender transmit small data packages (0.3 kbps to 5.5 kbps) to a receiver over a long distance.. LoRa uses a radio modulation technique (spread spectrum) that can be generated by Semtech LoRa transceiver chips.

    LoRa modulation technique allows long range communication of small amounts of data (which means a low bandwidth), high immunity to interference, while minimising power consumption. So, it allows long distance communication with low power requirements

  • Maker UNO Edu Kit (Arduino Compatible)

    $27.00

    On top of the features that comes with Maker UNO (12 LEDs, 1 speaker & 1 push button), this starter kit includes a Maker UNO, USB micro-B cable for power and USB connection, a small breadboard and other component for experiments to learn electronics and coding. Digital output using LEDs & driving a small motor, Digital input using push button, Analog input with potentiometer, LDR for light detection and more. It also comes in a nice plastic box to keep all your things.

  • NodeMCU V2 – WiFi Board

    $21.60

    NodeMcu is an open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines. The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board. Power your developement in the fastest way combining it with NodeMcu Firmware!

  • NodeMCU V3 WiFi Board

    $20.52

    NodeMCU V3 is an open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines. The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board. Power your developement in the fastest way combining it with NodeMcu Firmware!

  • Out Stock
    Quick View

    Raspberry Pi Zero W

    $34.56

    The credit-card-sized computer has become even smaller! The Raspberry Pi Zero W is still the Pi you know and love, but at a largely reduced size of only 65mm long by 30mm wide and at a very economical price. With the addition of wireless LAN and Bluetooth, the Raspberry Pi Zero W is ideal for making embedded Internet of Things (IoT) projects. The Pi Zero W has been designed to be as flexible and compact as possible with mini connectors and an unpopulated 40-pin GPIO, allowing you to use only what your project requires.

  • Servo Driver HAT for Raspberry Pi

    $23.76

    The Servo Driver HAT for Raspberry Pi is a hardware add-on board for the Raspberry Pi microcomputer. It allows the Raspberry Pi to control up to 16 servo motors simultaneously, making it ideal for robotics and automation projects. The HAT (Hardware Attached on Top) design makes it easy to install and use, simply plugging it onto the Raspberry Pi’s 40-pin GPIO header. The Servo Driver HAT uses the I2C interface for communication with the Raspberry Pi, which allows for efficient use of the available GPIO pins.