Accessories
-
L298N Dual Motor Controller
$9.81The L298N Dual Motor Controller is a dual H-bridge motor driver integrated circuit (IC) that is commonly used to control the speed and direction of two DC motors. It can handle motors that require up to 46 volts and 2 amps of current, making it suitable for a wide range of applications. The L298N features an on-board 5V regulator, which can be used to supply power to an external control circuit. It also has a set of control pins for each motor, allowing you to set the speed and direction of each motor independently.
-
Little Fuse 125V 10A (LFU-10) 10pcs
$13.08Little Fuse 125V 10A is a type of fuse that is used to protect electrical circuits. Fuses are safety devices that are designed to “break the circuit” in case of an overload or short circuit, preventing damage to the electrical system and potentially dangerous conditions. The Little Fuse 125V 10A specification indicates that the fuse is rated to safely interrupt electrical flow in a circuit that has a maximum voltage of 125 volts and a maximum current of 10 amps. This type of fuse is commonly used in household and light commercial electrical systems to protect against overloading and short circuits. The “Little Fuse” brand is a well-known manufacturer of fuses and other electrical protection devices.
-
Male to Female 20cm 40P DuPont Color Jumper Wire
$4.36The Male to Female 20cm 40P DuPont Color Jumper Wire is a set of 40 wires that are commonly used in electronics projects and DIY circuits. These jumper wires feature a male connector on one end and a female connector on the other, and a 20cm length, making them suitable for use with a wide range of electronic components and printed circuit boards (PCBs).
The wires are made of high-quality materials and are designed to provide a secure and reliable connection between components. They are color-coded for easy identification and organization, allowing for quick and easy connections between components in a circuit.
-
Male to Male 20cm 40P DuPont Color Jumper Wire
$4.36The Male to Male 20cm 40P DuPont Color Jumper Wire is a set of 40 wires that are commonly used in electronics projects and DIY circuits. These jumper wires feature a male connector on both ends and a 20cm length, making them suitable for use with a wide range of electronic components and printed circuit boards (PCBs).
The wires are made of high-quality materials and are designed to provide a secure and reliable connection between components. They are color-coded for easy identification and organization, allowing for quick and easy connections between components in a circuit.
-
Metal DC-021, DC jack, DC power socket interface, 5.5-2.1MM DC-005
$1.09The Metal DC-021, also known as a DC jack or DC power socket interface, is a device used to connect a power source to an electronic device. It has a 5.5mm outer diameter and a 2.1mm inner diameter, making it compatible with a variety of power sources. The metal construction makes it durable and reliable, ensuring stable and safe power connections for your devices. The compact size of the DC jack makes it easy to integrate into your electronics projects.
-
Metal Push Button, Momentary (Self-reset), 3V, Green LED, Black Body
$2.73A Metal Push Button, Momentary (Self-reset), 3V, Green LED, Black Body is a tactile switch designed for momentary activation. It features a sturdy metal construction with a black body, providing durability and a sleek appearance. The button is equipped with a built-in green LED, which emits a vibrant green light when pressed. It operates at a voltage of 3V, making it suitable for various electronic applications. This push button is designed to automatically reset to its original position after being pressed, ensuring momentary activation and quick functionality.
-
Micro USB to USB-C Adapter
$2.18A Micro USB to USB-C Adapter is a small device that allows you to connect a Micro USB cable to a device with a USB-C port. This adapter converts the Micro USB plug into a USB-C plug, enabling you to use your older Micro USB cables with newer devices that use the more modern USB-C standard. This adapter is useful for those who have many Micro USB cables but are now using a device with a USB-C port, as it enables them to continue to use their existing cables without having to purchase new ones.
-
Motor Driver TB6612FNG
$13.08The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.
Logic supply voltage (VCC) can be in the range of 2.7–5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).
This little board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1″ pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.
-
NPN Bipolar Transistor – 2N2222
$1.09The 2N2222 is a type of NPN bipolar transistor, a type of semiconductor device used as an amplifier or switch in electronic circuits. The 2N2222 has three pins: the collector, the base, and the emitter. When a voltage is applied to the base, it controls the flow of current between the collector and emitter. This allows the 2N2222 to act as a switch or amplifier in a circuit. The 2N2222 is a popular choice for electronic projects due to its low cost, ease of use, and versatility.
-
OLED Display Module 128×64 Pixels
$3.82OLED (Organic Light-Emitting Diode) display is 0.96″ and has a resolution of 128 x 64 pixels. It uses a I2C protocol for communication. OLED is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. In low ambient light conditions such as a dark room, an OLED screen can achieve a higher contrast ratio than a LCD. OLED display module also has a much faster response time than an LCD. OLED possesses high application potential for virtually all types of displays.
-
One Channel Relay
$5.45The One Channel relay module is suitable for SCM development, home appliance control. It is with 5V~12V TIL control signal which can control DC / AC signal. The module is perfect for common Arduino application. Useful to control a motor, a led strip, or any other module using Arduino. How to use it: Just connect a digital output of your Arduino to your relay module, and you can control a power-demanding appliance with the digital signal provided by your Arduino.
-
Piezo Buzzer (Small)
$1.09The Piezo Buzzer (Small) is a compact and convenient audio signaling device that is widely used in a variety of electronic applications. It consists of a piezoelectric element that produces a high-pitched, audible tone when supplied with an electrical voltage. The buzzer is small and lightweight, making it ideal for use in portable and compact electronic devices. The buzzer features two wire leads for easy integration into your circuit, and is compatible with a wide range of voltages and frequencies, making it suitable for use in a variety of projects and applications.
