Accessories
-
Battery Jack
$1.09The Battery Jack is a power connector designed for use with electronic devices such as single-board computers, development boards, and portable devices. It allows you to connect a battery to your device for portable, cord-free operation. The Battery Jack features a standard DC power jack that can be connected to a wide range of batteries, including rechargeable lithium-ion batteries and alkaline batteries. It is easy to install and use, and is designed to be compact and lightweight, making it ideal for use in portable devices. The Battery Jack provides a reliable and convenient power source for your electronic device, making it an essential accessory for anyone looking to use their device in a mobile or untethered environment.
-
Breadboard Trim Potentiometer – 10K
$1.64Breadboard trim potentiometer – 10K
These potentiometers are great for project prototyping. The three legs are spaced to fit perfectly in our range of solderless breadboards, giving each leg its own lane for hooking up to your microcontroller with jumper wires.
-
Electronic 10k Slide Potentiometer Model
$5.45A potentiometer module for Arduino is an electronic component that allows for the measurement of analog values by converting the position of a rotating shaft or slider into a electrical signal. Potentiometers are commonly used to control the brightness of a light, the volume of an audio system, or to sense the position of a joystick, among other applications.
A potentiometer module for Arduino is a convenient and easy-to-use component that is specifically designed to be used with the popular open-source electronics platform. The module typically contains a potentiometer, which is a variable resistor, as well as a few other electronic components that allow it to interface with the Arduino board.
-
Ethernet Cable (1.5 meter)
$2.18- Exceed ANSI/TIA-568-D.2 Category 6 and ISO 11801 Class E Standards
- Up to 550MHz with 1G/10G-T Speed, Support PoE/PoE+/PoE++ (IEEE 802.3af/at/bt)
- Performance Tested with Fluke and Wired T568B
- Strain Relief and a Flexible Boot Simplify Moves, Additions and Changes
- Stranded Cable and RJ45 Modular Plugs with 50μ” Gold-plated Contacts
-
Use in Patch Panel or Equipment Connections in Enterprise Networks and Data CenterSupport Current and Future Category 6/5e/5 Applications
-
Female to Female 20cm 40P DuPont Color Jumper Wire
$4.36The Female to Female 20cm 40P DuPont Color Jumper Wire is a set of 40 wires that are commonly used in electronics projects and DIY circuits. These jumper wires feature a female connector on both ends and a 20cm length, making them suitable for use with a wide range of electronic components and printed circuit boards (PCBs).
The wires are made of high-quality materials and are designed to provide a secure and reliable connection between components. They are color-coded for easy identification and organization, allowing for quick and easy connections between components in a circuit.
-
Four-Channel Low Level Trigger Power 5V Relay Module
$10.90This four channels Relay Module can be used to control the lighting, electrical and other equipments through the digital IO port. The digital input circuit is optically isolated from the relay, so your controller is protected from voltage spikes and surges. The module is controlled with 5V signal and they are pre-soldered. A logic “LOW” to the control pin will turn the relay ON.
-
FTDI Breakout Board FT232RL Programmer
$5.45The FTDI Breakout Board FT232RL Programmer is a device used for converting USB signals to serial (TTL-level) signals. It is commonly used for programming microcontrollers and for connecting devices that use a serial interface to a computer through a USB port. The FT232RL is a highly integrated chip that contains all the necessary components for converting USB signals to serial signals and vice versa. The breakout board provides a convenient way to interface with the FT232RL, including a USB connector, pin headers for connecting to other devices, and a set of status LEDs
-
H-bridge Stepper Motor Dual DC Motor Driver Controller Board HG7881
$13.08The HG7881 H-Bridge Stepper Motor Dual DC Motor Driver Controller Board is a versatile motor control board designed to drive both stepper motors and DC motors. It uses an H-bridge configuration to control the direction and speed of the connected motors. The HG7881 is capable of driving motors that require up to 40 volts and 3 amps of current, making it suitable for a wide range of applications. It features a compact design, with a size of only 40 x 40 mm, and can be easily integrated into a variety of projects.
-
HDMI to HDMI Cable (1.5 meter)
$5.45The HDMI to HDMI Cable (1.5 meter) is a cable used to connect devices that support the HDMI (High-Definition Multimedia Interface) interface, such as Blu-ray players, gaming consoles, streaming devices, and computers. The cable has an HDMI connector on both ends and is 1.5 meters in length, providing ample reach for most applications. The HDMI to HDMI Cable provides a high-quality digital connection that allows for the transfer of audio and video signals between devices. It supports high-definition video resolutions up to 4K, as well as audio formats such as Dolby TrueHD and DTS-HD Master Audio. This means that users can enjoy high-quality video and audio from their connected devices.
-
I2C 16×2 Character LCD Module
$21.80This is another great 16×2 character LCD display with I2C interface. As the pin resources of Arduino controller is limited, your project may be not able to use standard LCD module after connected with a certain quantity of sensors or SD card. However, with this I2C interface LCD module, you will only need 2 pins (SCL and SDA) to display the information. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.
-
Infrared LED Receiver Diode
$1.09The Infrared (IR) LED Receiver Diode is a small component that is used to detect and receive IR signals. It is designed to be low-cost, low-power, and compact, making it ideal for a wide range of projects and applications. The IR LED Receiver Diode consists of a small photodiode that is housed in a cylindrical package, with leads that are used to connect it to a circuit. When an IR beam is directed at the diode, it generates a small electrical current that can be processed by a microcontroller or other control unit.
-
KY-016 Full Color RGB LED Module
$1.09The KY-016 Full Color RGB LED emits a wide range of different colors by mixing red, green and blue light. Compatible with many popular microcontrollers like Arduino, Raspberry Pi and ESP32
